PRIME GUARD LACCO+

Protect, preserve, perform.

Moisture,
termites,
rust stops
right here

PRIME GUARD LACCO+ is a complete protection system that blocks moisture, helps prevent termite attack in wood, protects steel from rust and corrosion, and safeguards concrete against water penetration and fungal growth.

How to apply
Direct apply
No primer, brush or roller
Recoat
2–3 hrs
Hard dry
5–8 hrs

The failure point

Three materials. One weakness.

Wood drinks water. Steel corrodes in it. Concrete wicks it. Where those materials are built into masonry, moisture crosses the joint and the damage starts out of sight, long before a stain appears on the paint.

  • Termite galleries eaten through the grain of a wooden door frame

    Termites and rot in timber

    The face of a frame buried in the wall never dries. That damp, dark contact surface is where termites and fungal growth begin, on the side nobody paints.

    Answered by Wood Seal

  • Rust blooming out of the joint where a steel window frame enters masonry

    Rust behind the render

    Steel frames and truss members hold moisture against themselves at every embedded contact point. Corrosion expands, cracks the render and stains the wall.

    Answered by Rust Shield

  • Damp lifting the paint off a wall in a ragged band just above the skirting tiles

    Dampness in the wall

    Moisture travels out of concrete basement belts and frames into the masonry beside them, blistering paint, softening plaster and leaving salt bloom behind.

    Answered by Aqua Block

Our products

One coating for each material

How it works

A barrier at the joint

Each product bonds into its own substrate and forms a continuous film at the contact face. Water arriving from the wall or the ground meets that film and stops. What sits behind stays dry, stable and structurally sound.

See how to apply
  • Cutaway of a teak door frame against a damp brick wall: water soaking through the brickwork stops at the black coating on the frame, and the teak behind it stays dry

    Wood

    Wood Seal® on a teak frame

    Water from the masonry stops at the coat on the faces that meet the wall. The teak behind it stays dry and sound.

  • The same cutaway with a pressed-steel door frame: water soaking through the brickwork stops at the black coating, and the steel behind it stays bright and free of rust

    Steel

    Rust Shield® on a steel frame

    Water from the masonry stops at the coat on the faces that meet the wall. The steel behind it stays dry, so rust never gets started.

  • A mason laying laterite blocks on a concrete basement belt coated black with Aqua Block: damp rising out of the ground through the stone basement stops at the black coat, and the wall above it stays dry

    Concrete

    Aqua Block® on a basement belt

    Damp rising from the ground stops at the coat on the belt. The wall built on it stays dry.

Product specification at a glance

1 L
Net content per tin
24
Months shelf life, unopened
2–3
Hours to recoat
5–8
Hours to hard dry
Water beading into spheres on a coated dark surface instead of spreading
Water beads instead of wetting. That is the film doing its job.

Why Prime Guard

Built for the way India builds

  • Blocks moisture transfer

    The one mechanism behind all three products: stop water crossing the joint.

  • Direct apply

    Straight onto timber, steel or concrete. Brush or roller, no separate primer coat.

  • Strong adhesion

    Bonds into the substrate rather than sitting on it, so the film stays put.

  • Same-day schedule

    Recoat in 2–3 hours, hard dry in 5–8. Frames can be prepped and fixed without losing days.

  • New build or renovation

    Specify it at construction stage, or use it to stop an existing damp problem getting worse.

  • One system, three substrates

    A single specification covers every junction on site instead of three unrelated products.

The 1 litre Wood Seal tin turned to the panel that carries its QR code The QR code on the tin, enlarged. It opens the Wood Seal page.

On the tin

Everything you need is printed on it

Each 1 litre tin carries the full method, the timings and the safety guidance, plus a QR code that opens that product's page here — the same directions, the specification and the application video, on the phone already in your hand.

Net content
1 Litre
Shelf life
24 months unopened
Storage
Cool, dry, out of sunlight
On the label
Scan QR for full details

Protect • Preserve • Perform

Specify it once. Protect it for good.

Talk to us about project quantities, dealer and distributor appointments, or which product belongs at which junction on your site.

Start a dealer enquiry +91 6235 999 199